Справочник Пользователя для HydroPoint data systems inc. WT008
The lower line of the display shows the default setting of 23:00
hours.
hours.
2.
Turn the Lower Line dial to set the number of hours.
3.
Turn the Upper Line dial to the right once more to select the
number of minutes.
number of minutes.
4.
Turn the Lower Line dial to set the water window minutes
(00 to :59).
(00 to :59).
Note:
The minimum window you can set is 6 hours.
Setting the High ET Start
With the WeatherTRAK ET plus, you set a High ET Start Time for
when you need to water more than once per day to adjust for
extreme weather conditions.
when you need to water more than once per day to adjust for
extreme weather conditions.
During periods of high ET, the WeatherTRAK ET plus may water
every day of the week using a single start time. If you need more
water within a given day, (typically for turf), the WeatherTRAK ET
plus will irrigate a second cycle long enough to replenish the
required ET.
every day of the week using a single start time. If you need more
water within a given day, (typically for turf), the WeatherTRAK ET
plus will irrigate a second cycle long enough to replenish the
required ET.
To do this:
1.
Turn the Upper Line dial until you see:
2.
Turn the Lower Line dial to set the High ET start hour (1 to 9).
The lower line of the display shows the default setting of 1 PM.
3.
Turn the Upper Line dial to the right once more to select the
High ET start minutes.
High ET start minutes.
4.
Use the Lower Line dial to change the High ET start minutes (00
to :59).
to :59).
SET HIGH ET START (HOUR)
01:00pm
Setting Up Your WeatherTRAK ET Plus
15
Setting the Irrigation Start Time
With the WeatherTRAK ET plus, once you set a start time, the rest of
the irrigation calculations are done automatically.
the irrigation calculations are done automatically.
To set the irrigation start time:
1.
Turn the Upper Line dial until you see:
2.
Turn the Lower Line dial to set the hour (AM or PM) you would
like irrigation to begin.
like irrigation to begin.
3.
Turn the Upper Line dial to the right once more to select the start
time minutes.
time minutes.
4.
Use the Lower Line dial to change the start time minutes.
Note:
The default start time is 12:01am. You cannot set the time
to 12:00.
Setting the Water Window
The “water window” allows you to create a "window" of time that
irrigation is allowed to operate. The calculated program may be
shorter or longer than the window. If it is longer than the window, it
will not complete. Any incomplete run times will be carried over to
the next irrigation day. You will get an alert on the third line of the
display indicating the water window alert.
irrigation is allowed to operate. The calculated program may be
shorter or longer than the window. If it is longer than the window, it
will not complete. Any incomplete run times will be carried over to
the next irrigation day. You will get an alert on the third line of the
display indicating the water window alert.
To create a water window, the end time must be at least six hours
from the start time to allow for effective watering.
from the start time to allow for effective watering.
To set the water window:
1.
Turn the Upper Line dial until you see:
SET WATER WINDOW (HOUR)
23:00 hrs (End 11:01pm)
SET IRRIG START (HOUR)
12:01am
Setting Up Your WeatherTRAK ET Plus
14