Справочник Пользователя для HydroPoint data systems inc. WT008
Getting to Know Your WeatherTRAK ET Plus
9
Review
This setting displays each station’s:
•
irrigation run time,
•
number of cycles,
•
soak times,
•
adjustment factor expressed as a percentage, and
•
operating days.
Adjust
When you set a station to Auto, this feature adjusts:
•
the percentage (ET).
When in auto mode, you can adjust the station ET. They are
adjustable in increments of 5% (in a range of -50% to +25%).
adjustable in increments of 5% (in a range of -50% to +25%).
Rain Pause
This feature lets you shut down the controller for a specific
number of days.
number of days.
Off
This setting stops all irrigation. The controller will still receive
daily (ET) updates and the schedule will be recalculated.
daily (ET) updates and the schedule will be recalculated.
Display Adjust
This feature lets you adjust the contrast of the display for better
viewing.
viewing.
Help
Select “Help” to see the toll free phone number to call for
information about your WeatherTRAK ET plus controller. The
“Help” feature also displays important activation and
troubleshooting information about your controller.
information about your WeatherTRAK ET plus controller. The
“Help” feature also displays important activation and
troubleshooting information about your controller.
Alerts
This setting provides a list of alerts that you will receive about
your controller. You will be alerted if you attempt to make a
setting that could harm your plants, as well as alerts for electrical
and communication malfunctions.
your controller. You will be alerted if you attempt to make a
setting that could harm your plants, as well as alerts for electrical
and communication malfunctions.
Getting to Know Your WeatherTRAK ET Plus
8
ET
This setting displays:
•
the last ET value received (daily value) with the time and
date it was received,
date it was received,
•
the weekly ET value, which is an accumulation of the ET
values sent over the last seven days, and
values sent over the last seven days, and
•
an optional feature where you can set custom plant and turf
types and associated water requirements.
types and associated water requirements.
Manual
This feature lets you manually operate one, multiple or all
stations for a specific period of time, in increments of 1 minute,
from 1 to 99 minutes.
stations for a specific period of time, in increments of 1 minute,
from 1 to 99 minutes.
6.
Information Display
This three-line display shows the status of your controller and
the adjustments that you make to it.
the adjustments that you make to it.
Selecting and Adjusting the Settings
You can select and adjust the controller’s settings in three simple
steps.
steps.
1.
Turn the Function Selector dial to one of the following settings.
Going clockwise they are:
Going clockwise they are:
•
Run
•
Setup
•
Schedule
•
Program
•
Copy
•
Review
•
Adjust
•
Rain Pause
•
Off
•
Display Adjust
•
Help
•
Alerts
•
ET
•
Manual
You will see the display change as you turn the dial.