Справочник Пользователя для WatchGuard Technologies BF4S16E5W

User Guide

25

Physically Connect to the SOHO 6 Wireless

• a straight-through Ethernet cable to connect each hub to the 

SOHO 6 Wireless.

1

Shut down your computer. If you connect to the Internet 
through a DSL modem or cable modem, disconnect the power 
supply from this device.

2

Disconnect the Ethernet cable that runs from your DSL 
modem, cable modem or other Internet connection to your 
computer. Connect the Ethernet cable to the WAN port on the 
SOHO 6 Wireless. 

The SOHO 6 Wireless is connected directly to the modem or other Internet 

connection.

3

Connect one end of the straight-through Ethernet cable 
supplied with your SOHO 6 Wireless to one of the trusted 
network ports (0-3) on the SOHO 6 Wireless. Connect the other 
end to the uplink port of the Ethernet hub.

The SOHO 6 Wireless is connected to the Internet and your Ethernet hub.

4

Connect an Ethernet cable between each of the computers and 
an uplink port on the Ethernet hub.

5

If you connect to the Internet through a DSL modem or cable 
modem, reconnect the power supply to this device. The 
indicator lights flash and then stop. The modem is ready for 
use.

6

Attach the AC adapter to the SOHO 6 Wireless. Connect the AC 
adapter to a power supply.

7

Restart your computer.

See “Factory default settings” on page 31 for the factory default 
configuration options. See “External Network Configuration” on 
page 37 and “Configure the Trusted Network” on page 42 for 
special configurations.