Справочник Пользователя для WatchGuard Technologies BF4S16E5W
User Guide
53
Configure the Wireless Network
Configure the Beacon Rate
1
In the AP Beacon Rate text box, type the beacon rate in
milliseconds (100 through 10,000) that you want the SOHO 6
Wireless to use.
milliseconds (100 through 10,000) that you want the SOHO 6
Wireless to use.
The beacon rate is the rate the SOHO 6 Wireless sends out broadcasts so
that the wireless computers can find it.
2
If you want the SOHO 6 Wireless to broadcast a beacon rate,
select Enabled from the Broadcast SSID in AP Beacon Frames.
If you do not want to broadcast the beacon rate, select
Disabled.
select Enabled from the Broadcast SSID in AP Beacon Frames.
If you do not want to broadcast the beacon rate, select
Disabled.
3
If you want the SOHO 6 Wireless to respond to request from
the wireless computers, select Enabled in the Respond to SSID
Query Requests. If you do not want the SOHO 6 Wireless to
respond, select Disabled.
the wireless computers, select Enabled in the Respond to SSID
Query Requests. If you do not want the SOHO 6 Wireless to
respond, select Disabled.
The wireless computers send out query requests to find if there are any
wireless access points that it can connect to.
Log Authentication Events
If you want the SOHO 6 Wireless to log when a wireless computer
tries to access it, select Enabled. If you do not want to log
authentication events, select disabled.
tries to access it, select Enabled. If you do not want to log
authentication events, select disabled.
Set Advanced Settings
‘You can change Maximum Transmit Rate and Fragmentation
Threshold.
Threshold.
• To change the Maximum Transmit Rate, select the rate per
Mbits per second from the Maximum Transmit Rate drop-
down list.
down list.
• To change the Fragmentation Threshold, type a value of 256
to 4096 in the Fragmentation Threshold text box.