Справочник Пользователя для WatchGuard Technologies BF4S16E5W
User Guide
73
Configure incoming and outgoing services
2
Locate a pre-configured service, such as FTP, Web, or Telnet,
then select either Allow or Deny from the drop-down list.
then select either Allow or Deny from the drop-down list.
The illustration shows the HTTP service configured to allow incoming
traffic.
3
Type the trusted network IP address of the computer to which
this rule applies.
this rule applies.
The illustration shows the HTTP service configured to allow incoming
traffic to the computer with IP address 192.168.111.2.
4
Click Submit.
Create a custom service
If you need to allow a service that is not listed in the common
services, configure a custom service based on a TCP port, a UDP
port, or a protocol.
Follow these steps to configure a custom service:
services, configure a custom service based on a TCP port, a UDP
port, or a protocol.
Follow these steps to configure a custom service:
1
Type the IP address of the trusted network in your browser
window to connect to the System Status page of the SOHO 6
Wireless:
window to connect to the System Status page of the SOHO 6
Wireless:
The default IP address is: http://192.168.111.1
2
From the navigation bar on the left side, select
Firewall => Custom Service.
Firewall => Custom Service.
The Custom Service page opens.