Справочник Пользователя для Cardo Systems ER17

Press 

 for 2 seconds

• ON: 3 BLUE flashes + ascending tone 

• OFF: 3 RED flashes + descending tone

Tap   or   to adjust and set volume of current 

audio source

Tap   and   simultaneously

In Standby, press   and   for 5 seconds

• Blue LED = Full charge

• Purple LED = Half charge

• Red LED = Almost empty

In Standby, press 

 for 2 seconds and follow 

the spoken instructions

In Standby, tap 

 and 

 simultaneously

In Standby, press 

 and 

 for 2 seconds

If “One+8” Buddies are within range, purple 

LEDs flash for 2 seconds

Tap 

 twice

Enable / Disable VOX 

(For Intercom calls 

only)

In Standby, press   and   for 2 seconds

• Enabled: Blue flash for 2 seconds

• Disabled: Red flash for 2 seconds

Press 

 and 

 for 2 seconds

cardo SHO-1 is OFF

Standby mode – No active audio

Active mode – Call in progress / 

music or other audio source is ON

Standby mode – Battery is low

Active mode – Battery is low

USB connected

Charging

If two connected audio sources try to play audio simultaneously, 

the cardo SHO-1 automatically determines which to play through 

the speakers based on the priority of the connected devices.

Higher Priority

3. A2DP (Stereo Bluetooth) audio



Lower Priority

•  Incoming mobile phone calls interrupt ongoing intercom calls
• Incoming intercom calls will interrupt ongoing A2DP music
•  Click-to-Link, Intercom and “One+8” calls have the same priority:

   Click-to-Link requests will not interrupt any type of Intercom call in 

progress, and vice-versa

 

|