Справочник Пользователя для SendFar Technology Co. Ltd. ORB-02001

2 

 

Special

 Ethernet port 1 for connecting the MIL-C-5015 style Ethernet 

Cable 

 

Special

 serial port 2 for connecting the MIL-C-5015 style RS-232 

console port cable 

 

Reverse Polarity-N Male connector 3 for connecting the antenna or 
RF cable. 

 

Grounding port 4. 

 

Power & Data output port 5 for connecting the other of the MIL-C-
5015 style Ethernet Cable 

 

Data input port 6 for connecting the Ethernet Cable to a Hub Switch 
Router or a PC.  

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

3 

Before installing your Outdoor Wireless LAN system for your outdoor 
application in a hard-to-reach location, we recommend that you configure 
and test all the devices first. 
 
For configuring the Outdoor Router/Bridge, you need follow the quick steps 
below to power up your Router/Bridge:  
 
Step 1:

With the unit powered off, attach one end of the RF cable to the 

antenna connector and then connect the antenna to the other end of the RF 
cable as shown in following:  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Step 2

Plug the female end of the power cord into the Inline Power Injector, 

and then plug the male end of the power cord into a power outlet or power 
strip. The Power LED on the front of the Inline Power Injector will light up. 
 
Step 3

Run the cross over Ethernet cable (included in your package) from 

Data Input Port (on the front of the Inline Power Injector) to the Ethernet 
Port on a PC. 
 
NOTE: This connection is required for setting up initial configuration 
information. After configuration is completed, this cable will be removed,