Справочник Пользователя для SendFar Technology Co. Ltd. ORB-04002

 

 

36

 

following procedures.  

The web user interface can be grouped into Quick setup, Basic 
Configuration, Advanced Configuration, Utility and Firewall as shown in 
Figure 3-4. The left frame contains, in a tree structure, the contents of the 
RB web configuration interface. Move through the tree by clicking on an icon 
to expand or collapse the tree. The nodes on the tree represent web pages 
that allow you to view and modify the parameters of the RB. 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

If users want to connect multiple wireless computers to a broadband (ADSL 
or Cable) modem or an Ethernet switch to surf the Internet, you need to 
configure the RB as a broadband wireless router to share a single IP 
address with the multiple wireless computers as described as follows. 
 
 
 

 

 

37

 

1.  Click Advanced Config, select Bridging, and then click Enable for 

Bridge Function as shown in Figure 3-5. In the Bridging Parameter 
window, enter the IP Address (default is 192.168.2.1) and Subnet 
Mask (default is 255.255.255.0) that are suitable for your network 
domain. After that, click FINISH at the bottom of this page to complete 
the modification of this page.