Справочник Пользователя для SendFar Technology Co. Ltd. ORB-04002

6.1.8 Wireless LAN

Parameter

Description

Default Value

Regulatory Domain

Define the regulatory domain to
which this NIC may be deployed

Channel

The operating radio frequency
channel for the AP

RTS Threshold

Set RTS (Request To Send)
threshold value

250

Fragmentation

Threshold

Set fragmentation threshold
value

1600

SSID

Wireless LAN service area
identifier of the AP (case sensitive)

wireless

Station Name

Shows the name of the AP

WEP

Enable or disable 64-bit WEP
(Wired Equivalent Privacy) key to
encrypt data

Disable

Default Key

Select a WEP key to encrypt
each frame transmitted from the
radio using one the of the Keys
from the Key Panel

Key Panel

When you use WEP to
communicate with the other
wireless clients, all the wireless
devices in this network must have
the same encryption key or pass
phrase.

Note: each key must consist of
hex digits, it means that only
digit 0 -9 and letters A-F are
valid entries. If entered
incorrectly, program will not
write keys to a driver.

6.2

Advance Configuration

6.2.1 Bridging

Parameter

Description

Default Value

Bridging Function

Enable or disable bridging

Function

Enable

IP Address

IP Address of the AP when in

Bridging mode. The user can

use a LAN attached (wired or

wireless) computer to configure

the AP through using a web

browser or telnet program on a

LAN attached computer.

192.168.2.1

Subnet Mask

Consists of four sets of digits

that help divide a network into

sub-networks and simplify

routing and data transmission

255.255.255.0

Operation mode

Enable or disable the operation

mode

Enable

Disable

MAC Address

MAC address to be considered

in forward/filter policy

00-00-00-00-00-00

Interface

Select Filter(always block the

frames), Forward(always

forward the frames) or

Dynamic(forward the frames if

the MAC address exists) to the

corresponding interface

Filter

---