Справочник Пользователя для Controlled Electronic Management Systems Ltd S3040RH
S3040 Installation Manual
19
2.
Tap and hold an existing connection in the Windows wireless setting screen. The Wireless
settings menu is displayed as in Figure 21.
settings menu is displayed as in Figure 21.
3.
Tap the Remove Settings button to delete the existing connection.
3.4.4 Turning WiFi on and off
If the S3040 is only to be used with USB connection, ensure no wireless access points are
configured and turn off the wireless as described below. This will prolong battery life between
S3040 charging intervals.
configured and turn off the wireless as described below. This will prolong battery life between
S3040 charging intervals.
Note
The wireless will normally be turned off, if it has not been used before. If this is the case, a
large button Search for Networks will be displayed. If this is displayed, then wireless is
already switched off. Take no further action.
large button Search for Networks will be displayed. If this is displayed, then wireless is
already switched off. Take no further action.
1.
Follow Steps 1-7 in Connecting to AC2000 Wirelessly on page 15.
2.
If wireless has been switched on before and existing Wireless Access Points are listed, tap
and hold the Add New button or select Menu on the bottom toolbar to display the Wireless
settings menu.
and hold the Add New button or select Menu on the bottom toolbar to display the Wireless
settings menu.
Figure 22 Wireless settings menu
3.
Tap Turn Off Wi-Fi to disable wireless.
4.
To enable wireless, repeat these steps again, choosing Turn on Wi-Fi from the Wireless
settings menu.
settings menu.