Справочник Пользователя для VPN Systems Inc. VPN350
4-33
Cisco Aironet Access Point Software Configuration Guide
OL-0657-07
Chapter 4 Security Setup
Setting Up MAC-Based Authentication
Figure 4-12 AP Radio Advanced Page
Step 15
Select Disallowed from the pull-down menu for Default Unicast Address Filter
for each authentication type requiring MAC-based authentication.
for each authentication type requiring MAC-based authentication.
For example, if the access point is configured for both open and Network-EAP
authentication, you could set Default Unicast Address Filter under Open to
Disallowed but leave Default Unicast Address Filter under Network-EAP set to
Allowed. This configuration forces client devices using open authentication to
authenticate using MAC addresses but does not force LEAP-enabled client
devices to authenticate using MAC addresses. To force all client devices to
authenticate using MAC addresses, select Disallowed for all the enabled
authentication types.
authentication, you could set Default Unicast Address Filter under Open to
Disallowed but leave Default Unicast Address Filter under Network-EAP set to
Allowed. This configuration forces client devices using open authentication to
authenticate using MAC addresses but does not force LEAP-enabled client
devices to authenticate using MAC addresses. To force all client devices to
authenticate using MAC addresses, select Disallowed for all the enabled
authentication types.