Справочник Пользователя для Lee Technology Korea Co. Ltd. LTK-25

6. The menu is as follows:

#1 = Set the Current Time (hours, minutes & am or pm)

#2 = Set the Sleep Shutdown Time (hourly 1-12, am or pm) *

*Be sure the times are set correctly or your pagers could go to sleep in the middle of a
shift!

#3 = Sleep Shutdown Green = Active, Red = Inactive

#4 = Page the Manager Green = Page Manager on Blinking Red, Red – No Manager

page

#5 = Page on Transition Green = Page Waiter on First Button press and all color

transitions Red = Waiter paged only on the first press

#6 = Set transition timers - how long between green to yellow to red transition

#7 = Not used

#8 = Not used

#9 = Not used

#10=Not used

#11=Not used

#12=Simple Page Green = Page waiter on first button press only.

4. To save the configuration at any time, hit the x3 button while at the top-level menu.

Programming & Configuration Instructions

To enter the programming mode, plug in the Unit while holding the X3 button. You will see the numbers 1
–

12 either flashing, solid Red or Solid Green. After setting the configuration below, press X3 button to save all the

settings.

1. Set the Current Time Menu

The numbers 1-12 can be pressed to correspond to the hours of the day. After pressing #1, press

1-12 to adjust the hour. To set the minutes, press either the #13 button (to scroll up) or #14 (to scroll

down). Use the flashing all sleep button to toggle between am & pm. The dot on the top middle portion

of the LCD indicates PM. (If the dot is there it’s pm; if there is no dot it is am) Note that this current time must

be set in order to have an accurate sleep shutdown.

Press the x3 button to exit this menu.

2. Set the Sleep Shutdown Time Menu

The numbers 1-12 can be pressed to correspond to the hours of the day. After pressing #2, press

1-12 for the hour you want the pagers to turn off for the night and use the flashing all sleep button to

toggle between am & pm. The dot on the top middle portion of the LCD indicates PM. (If the dot is there it’s

pm; if there is no dot it is am) Press the x3 button to exit the menu and set the time. Note that when the

internal clock reaches this time, all the pagers will be put to sleep.

3. Sleep Shutdown Active or not

If you want the pagers to automatically go to sleep at a specific time (by “B” above) this light

should be green. If the light is red the shutdown signal will not be sent.

4. Page manager on Blinking Red.

If this light is green the managers’ pager will be paged when any button pressed goes to blinking

red. You must have a numeric manager pager if you want the servers number sent with the page.

5. Page on transitions

If this light is green the server will be paged upon each transition. (i.e. – when each button pressed

turns yellow, red & flashing red the waiter will be paged.) All pages must be cancelled (by pressing the

button again) when the food is picked up.