Справочник Пользователя для Redline Communications Inc. AN30

 

 

AN-30 System User Manual 

 

 

 

 
Identify potential sources of RF interference. Test for possible RF interference on the 
roof-top or tower by utilizing appropriate test equipment. RF interference arises from any 
other wireless system operating within the same frequency band as the AN-30.  Note that 
the AN-30 system supports nine different overlapping channels within the 5.8 GHz band 
and has the ability to use up to five of these channels at any one cell site; there is, 
therefore, some flexibility in addressing or avoiding interference should other 
transmitters in relatively close proximity present problems. 
     
 

 
Once the site survey has been completed and the exact location for the antenna identified, 
the next step is to assemble and mount the radio onto either a building structure, pole or 
tower.  
 
Note there is an arrow on the back of the antenna, which must point in the same direction 
for both the local and remote systems to ensure proper polarization when the antenna is 
deployed (see Figure 7 above).  Ensure the proper polarization is used for the antenna 
before attaching the mounting bracket in the next step. 
 
The vertical mount bracket is installed first. The antenna and mounting brackets have 
been designed to withstand strong winds; it is imperative that all hardware for the 
mounting brackets be securely fastened to avoid any movement which could introduce 
misalignment.  
 

Page 21 of 80 

Redline Communications