Справочник Пользователя для Redline Communications Inc. AN30

 

 

AN-30 System User Manual 

 

 

•  tdm showactivebundles 

tdm showactivebundles, no params 
This command is used to return the number of active bundles and list the Ids of those 
bundles 

 
 

 

 

The general set/get operation has the following syntax: 
 

 
The get operation returns values from the running configuration. The set operation 
applies to the temporary configuration. The changes made by set operation become 
active only after the “tdm save” command is successfully executed. 
In the following commands, the “serial interface number” (SN) parameter must be a 
valid serial interface number (i.e.: for 4 T1/E1 valid values are 1, 2, 3, and 4), otherwise 
the command will return non-ack. 

 
The commands for serial interface configuration are:  
•  coding 

•  framing 

•  lbo 

 

The second parameter for each command is valid only if used with the set operation, 
as indicated below. 

 

coding, params: SN, COD_IND 
 

Defines the line coding type for the current serial interface on T1/E1 module. 

 

0 B8ZS 
1 AMI 
2 HDB3 

 

 framing, params: SN, FRM_IND 
 

Defines the framing type of the current serial interface on T1/E1 module. 

 

0 ESF 
1 D4 

Page 52 of 80 

Redline Communications