Справочник Пользователя для Redline Communications Inc. AN80IB
User
AN-80i
Manual
70-00072-01-06a
Proprietary Redline Communications © 2008
Page 47 of 96
June 1, 2008
4.4.2 Link
Screen
Click
New
Link
in the menu to add a new subscriber and choose the wireless parameters.
Figure 24: PMP - Link Configuration Screen
Link Name: Enter a name for this
Link
(15 characters max.). This
Link
name is displayed
with the
Link
ID
on information and statistics screens.
Link ID: (Read only) A unique
Link
ID
is generated automatically when a new link is
added.
Peer MAC: Enter the MAC address of the subscriber station. The sector controller only
registers a subscriber station if the MAC address has been entered using the link
configuration screen.
Max. DL Burst Rate: Select the downlink burst rate for unicast traffic from the sector
controller to the subscriber (based on link budget calculations).
Max UL Burst Rate: Select the uplink burst rate for unicast traffic from the subscriber to
the sector controller (based on link budget calculations).
Peer MAC: Enter the MAC address of the subscriber station. The sector controller only
registers a subscriber station if the MAC address has been entered using the link
configuration screen.
Max. DL Burst Rate: Select the downlink burst rate for unicast traffic from the sector
controller to the subscriber (based on link budget calculations).
Max UL Burst Rate: Select the uplink burst rate for unicast traffic from the subscriber to
the sector controller (based on link budget calculations).
Table 11: PMP Maximum Achievable UBR
Uncoded Burst Rate (Mbps)
SINADR (dB)
54
25
48
23
36
18
24
15
18
11
12
9
9
9
6
7