Справочник Пользователя для FLOTEC ENGINEERING INC. FPU-2520
3
► Insert your Mouse cable( )
to backside of connector.
► And then, insert
connector( + ) to PS2
port of your computer.
►Insert connector to USB
port of your computer.
►
Turn on the power of the
Pockey.
INSTALLATION
<
Care and Handling of the Pockey
TM
>
►Before unplugging the Pockey
TM
or turning off your computer, turn the
Pockey
TM
power switch to the “OFF” position. Failure to do so may
result in damage to the hard drive.
►Do not move or disconnect the Pockey
TM
from your computer while the
Pockey
TM
is reading or writing data. This may cause damage to the
hard drive.
►Handle and transport the Pockey
TM
very carefully. Do not drop or
aggressively handle the Pockey
TM
as this may cause damage to the
hard drive.
►Do not open the outer case. Opening the case may damage the
Pockey’s
TM
hardware, components, or hard drive.
►Do not tear or remove any labels on the Pockey
™
as it may damage
the hard drive.
1) Take USB cable and insert the connector( ) to the USB port located on your computer.
Next, connect the other end of the USB cable to the Pockey™.
NOTICE 1 : If you want to use Pockey™ with Toshiba laptop or Compaq laptop or
other computer which has some problem in USB port to supply electric power to
the Pockey, please use a split cable. (Refer to the figure)
If your computer USB port has no electric power problem, you don’t need to connect the cable
& .
2) Software installation in Windows 2000/ Windows XP
After connecting the Pockey™ to your computer via the USB cable, turn on the pockey