Справочник Пользователя для CAS Corporation CASTON3
10
Turn the power switch before using the scale. Power switch is located on the rear panel.
(1) ON/OFF KEY
€
Press the ON/OFF key then The scale will perform self-test on Weight Display and will
be ready to weigh when ZERO lamp turns on.
(2) ZERO FUNCTION
€
Used to remove small variations in the scale's zero.
(You can adjust the zero up to
2% or
10% of the maximum capacity)
€
If the weight is not zero though there is nothing on the hook, you can press ZERO key
to go to zero state.
(3) TARE FUNCTION
€
Tare is the weight of container being used for a commodity. The TARE key subtracts
the weight of the container.
€
After hanging a container on the hook, press the TARE key. Then the scale will
memorize the weight of the tare, and will display 0 kg with turning on the TARE lamp.
€
If you weigh items, you will see the net weight.
€
To release this function, remove everything from the hook and press the TARE key.
Then the TARE LAMP will turn off and this function is terminated.
;
The weight including TARE weight can't exceed the maximum capacity.
(4) HOLD FUNCTION
Automatic Hold Function (This function is performed whenever you weigh an item)
€
Press the HOLD key when the hook is empty (in zero value condition)
€
The Weight Display will display "AH on" sequentially.
€
The scale will change from the Normal mode to Auto-hold mode, and HOLD lamp will
turn on.
€
If you weigh unstable things in Auto-hold mode, "HoLd" will display on the Weight
Display. And then, the average value of the weight fluctuation will display.
€
If the weight fluctuation range exceeds within
±
10% of weight, the scale will retry
Auto-hold function.
€
To escape from Auto-hold mode, press the HOLD key.
It will be returned to the Normal mode and "AHoFF" will be displayed with HOLD
lamp turning off.
9. FUNCTIONS & DESCRIPTIONS