Справочник Пользователя для Airaya Corp GRID-3X3-PS
- 18 -
Airaya
WirelessGRID-300 Backhaul
Current Settings
Quick Add Instructions – Step-by-step instructions to set up and add a
new bridge to a WirelessGRID-300 network.
new bridge to a WirelessGRID-300 network.
Software Version – Current software (firmware) version installed on the
bridge.
Hardware Version – Current hardware version of the bridge you’re
bridge.
Hardware Version – Current hardware version of the bridge you’re
connected to.
Bridge Uptime – Amount of time the bridge has been active since the
last reboot.
Operating In – Specifies the general frequency range of bridge
last reboot.
Operating In – Specifies the general frequency range of bridge
operation.
Unique Name – A unique identifier with up to 32 characters, which is
commonly used as a location identifier. Control characters are not allowed
in this field.
Unique Name – A unique identifier with up to 32 characters, which is
commonly used as a location identifier. Control characters are not allowed
in this field.
Wired Network Settings
IP Address – IP address of the bridge. The IP address for each bridge
must be unique, so please check with your network administrator for the
correct IP address assigned to your device.
must be unique, so please check with your network administrator for the
correct IP address assigned to your device.
Subnet Mask – Current subnet mask of the bridge you are working with.
The subnet mask allows networking software to determine which parts of
the IP address specify the network address and which parts specify the
host address.
Gateway Address – Current gateway address of the bridge you are
working with. IP packets destined for other subnets are automatically
sent to the default gateway, which routes traffic to the correct network.
MAC Address – Unique Ethernet address of bridge you are working with.
Radio Network Settings
WirelessGRID-300 ID – Displays a unique network ID. All bridges in a
WirelessGRID-300 network are required to use the same WirelessGRID-
WirelessGRID-300 network are required to use the same WirelessGRID-
300 ID.
Radio Channel Width – Current channel width (measured in Megahertz)
of the bridge.
of the bridge.