Справочник Пользователя для Geophysical Survey Systems Inc. MINIHR
Quick Start Guide
StructureScan Mini HR
Geophysical Survey Systems, Inc.
29
Collecting 3D Data
After your configuration is complete, you are now ready to 3D collect data.
Important Note: To assure consistency of StuctureScan Mini HR’s naming of the files collected
and saved, it is highly recommended that the SD card is inserted prior to any data collection.
and saved, it is highly recommended that the SD card is inserted prior to any data collection.
Collect Menu Options
1
From the Main Menu, select Collect by pressing Í.
2
Use Ï Ð buttons to highlight the appropriate options under the Collect Menu.
Before you begin to collect data (Collect), you may want to configure the Mini HR for a particular
project.
project.
3D Project: Saving Files to a Specific Project
1
Highlight Project and press
2
Highlight a Project number and press
All files that you save during collection will be saved under this project.
(Note: you may want to take field notes to document what files went under which project).
Depth: Selecting the Depth Where You are Scanning
1
Highlight Depth.
2
Press
to toggle between 8, 12, and 16 inches (20, 30, and 40 cm).