Справочник Пользователя для Geophysical Survey Systems Inc. MINIHR
Quick Start Guide
StructureScan Mini HR
Geophysical Survey Systems, Inc.
32
Collect: Collect 3D Grid
Highlight Collect and press enter to begin collecting 3D data
1
Begin by lining up the Mini HR with the appropriate pad. Using the lasers, line up the
laser pointing forward with Line 1. Line up the side lasers with the start line of the pad.
laser pointing forward with Line 1. Line up the side lasers with the start line of the pad.
2
Once you have lined up the
Mini HR, Press the Start Button
Ï and then roll the Mini HR to
the other end of the grid. The
Mini HR will automatically stop
collecting once it reaches the end
of the grid.
Mini HR, Press the Start Button
Ï and then roll the Mini HR to
the other end of the grid. The
Mini HR will automatically stop
collecting once it reaches the end
of the grid.
3
Return the Mini HR to the start of the grid and line up the lasers with the next line and repeat the process until all
the lines needed are collected.
the lines needed are collected.
4
Note at the top of the screen. This displays which line number you should be collecting.
5
You may press the “Next\Prev” buttons, (Left\Right)
ÍÎ, to scan a specific line. This can be used if you
do not collect a line correctly and need to redo
a line.
ÍÎ, to scan a specific line. This can be used if you
do not collect a line correctly and need to redo
a line.
6
Press
Scan Mode, to toggle the view of the scan.