Справочник Пользователя для Microsoft Corporation RM-132

FCC DRAF

T

To activate the camera, open the slide. If the camera is 
in the 

, select 

 from the active 

toolbar. 

Press the capture key to start recording. In the portrait 
mode, use the scroll key for recording. The red record 
icon 

 is shown and a tone sounds, indicating that 

recording has started. 

Select 

 to stop recording. The video clip is 

automatically saved to the 

 folder of 

. See ‘Gallery’, p. 26. The maximum length of the 

video is 60 minutes (if enough memory available).

To pause recording at any time, press 

. The pause 

icon (

) blinks on the display. Video recording 

automatically stops if recording is set to pause and there 
are no keypresses within a minute. Press the capture key 
again to resume recording.

To zoom in or out of the subject, press the zoom key on the 
side of the device.

To make lighting and color adjustments before recording a 
video, use the scroll key to scroll through the active 
toolbar. See ‘Setup settings—Adjust color and lighting’, 
p. 21 and ‘Scenes’, p. 21.

To free memory before recording a video, select 

 > 

 (only available if you have backed up 

images or video clips). See ‘Free memory’, p. 28.

The video viewfinder displays the following:

• The current capture mode indicator (1).
• The audio mute on indicator (2).
• The active toolbar (3), which you can scroll through 

before recording to select the scene, white balance, 
and color tone (the toolbar is not displayed during 
recording).

• The total available video recording time (4). When you 

are recording, the current video length indicator also 
shows the elapsed time and time remaining.

• The  device 

memory (

) and 

memory card 
(

)  indicators 

(5) show where 
videos are saved.

• The video quality 

indicator (6) 
indicates 
whether the 
quality of the video is 

, 

, or 

.

• The video clip file type (7).