Справочник Пользователя для Microsoft Corporation RM-236

Note:  Using voice tags may be difficult in a

noisy environment or during an emergency, so you

should not rely solely upon voice dialing in all

circumstances.
When you use voice dialling, the loudspeaker is in

use. Hold the device at a short distance away when

you say the voice tag.

1.

To start voice dialling, in the standby mode,

press and hold the right selection key. If a

compatible headset with the headset key is

attached, press and hold the headset key to start

voice dialling.

2.

A short tone is played, and 

 is

displayed. Say clearly the name or nickname that

is saved on the contact card.

3.

The device plays a synthesised voice tag for the

recognised contact in the selected device

language, and displays the name and number.

After a time-out of 2.5 seconds, the device dials

the number. If the recognised contact was not

correct, select 

 to view a list of other

matches or 

 to cancel voice dialling.

If several numbers are saved under the name, the

device selects the default number if it has been set.

If not, the device selects the first available number

in a contact card.

The log stores information about the

communication history of the device. The device

registers missed and received calls only if the

network supports these functions, the device is

switched on, and within the network service area.

Press  , and select 

 > 

.

To monitor the phone numbers of missed, received,

and dialled voice calls, select 

. The

device registers missed and received calls only if the

network supports these functions, the device is

switched on, and within the network service area.
To clear all recent call lists, select 

 > 

 in the recent calls main view. To clear

one of the call registers, open the register you want

to erase, and select 

 > 

. To clear

an individual event, open a register, scroll to the

event, and press C.

Press  , and select 

 > 

.

To monitor the approximate duration of your

incoming and outgoing calls, select 

.