Справочник Пользователя для Microsoft Corporation RM-342

To set up video sharing, you need person-to-person

and UMTS connection settings.

A person-to-person connection is also known as a

Session Initiation Protocol (SIP) connection. The SIP

profile settings must be configured in your device

before you can use video sharing. Ask your service

provider for the SIP profile settings, and save them

in your device. Your service provider may send you

the settings over the air or give you a list of the

needed parameters.
To add a SIP address to a contact card, do the

following:

1.

Press  , and select 

.

2.

Open the contact card (or start a new card for

that person).

3.

Select 

 > 

 > 

.

4.

Enter the SIP address in the format

username@domainname (you can use an IP

address instead of a domain name).
If you do not know the SIP address for the

contact, you can use the phone number of the

recipient, including the country code, to share

video (if supported by the network service

provider).

To set up your UMTS connection, do the following:

●

Contact your service provider to establish an

agreement for you to use the UMTS network.

●

Ensure that your device UMTS access point

connection settings are configured properly.

During an active voice call, select 

 > 

 :

1.

To share live video during the call, select 

.

To share a video clip, select 

.

Select a clip you want to share.
You may need to convert the video clip into a

suitable format to be able to share it. 

 appears.

Select 

.

2.

To share the video, select 

 > 

.

If you share live video, your device sends the

invitation to the SIP address you have added to

the recipient's contact card. If the contact

information of the recipient is saved in Contacts,

and the contact has several SIP addresses or

phone numbers including the country code,

select the desired address or number. If the SIP

address or phone number of the recipient is not

available, enter the SIP address or the phone