Справочник Пользователя для Microsoft Corporation RM-92

FCC Draft

automatically, according to the network parameters and 
the roaming agreements between the network operators. 
Contact your network operator for more details.

—Select 

 to set the device to 

search for and select one of the available networks, or 

 to manually select the network from a list of 

networks. If the connection to the manually selected 
network is lost, the device sounds an error tone and asks 
you to reselect a network. The selected network must have 
a roaming agreement with your home network, that is, the 
operator whose SIM card is in your device.

 Glossary: A roaming agreement is an agreement 

between two or more network service providers to 
enable the users of one service provider to use the 
services of other service providers.

—Select 

 to set the device to indicate 

when it is used in a cellular network based on microcellular 
network (MCN) technology and to activate cell info 
reception.

In the standby mode, 

 indicates a headset is connected, 

and  

 that the headset is unavailable, or a Bluetooth 

connection to a headset is lost. 

 indicates a loopset is 

connected and  

 that a 

 is connected.

Select 

, 

, 

, 

, or 

 and from the following:

—Set the profile that you want activated 

each time you connect a certain enhancement to your 
device. See ‘Profiles—set tones’, p. 90. 

—Set if you want the device to answer 

an incoming call automatically after 5 seconds. If the 
Ringing type is set to 

 or 

, automatic 

answer is disabled. Automatic answer is not available for 

.

—Set whether lights remain on, or are switched off 

after the time-out.  This setting is not available for all 
enhancements.

If you are using a 

, you must activate it on your device. 

Press 

, and select 

> 

> 

> 

> 

> 

.

You can use voice commands to control your device. For 
more information about the enhanced voice commands 
supported by your device, see ‘Voice dialing’, p. 60.

To activate enhanced voice commands for starting 
applications and profiles, you must open the 

 

R1113_en.book  Page 103  Friday, November 25, 2005  12:49 PM