Справочник Пользователя для Microsoft Corporation RM-92
FCC Draft
Camera
27
• To rotate an image clockwise or counterclockwise,
press
or
.
• To zoom in or out, press
or
.
• To move on a zoomed image, scroll up, down, left, or
right.
Record videos
If the camera is in
Image mode
, select video mode by
selecting
Options
>
Video mode
.
To select the secondary camera to, for example, include
yourself in the video, select
yourself in the video, select
Options
>
Use secondary
camera
.
To empty memory for new video clips, and delete copies of
the transferred files, select
the transferred files, select
Options
>
Go to free memory
(main camera only).
1 In the main camera, press the capture key, or in the
secondary camera, press
to start recording. The
record icon
is shown. The LED flash is lit, and a tone
sounds, indicating to the subject that video is being
recorded. There is no flash effect on the resultant video.
recorded. There is no flash effect on the resultant video.
2 To pause recording at any time, select
Pause
. The pause
icon (
) blinks on the display. Video recording
automatically stops if recording is set to pause and
there are no keypresses within a minute.
there are no keypresses within a minute.
3 Select
Continue
to resume recording.
4 Select
Stop
, to stop recording. The video clip is
automatically saved to the
Images & video
folder of
Gallery
. See ‘Gallery’, p. 31.
To make lighting and color adjustments before recording
a video, select
a video, select
Options
>
Video setup
. See ‘Setup
settings—Adjust color and lighting’, p. 24.
To select a shooting mode, select
Options
>
Video
setup
>
Shooting mode
. See ‘Shooting modes’, p. 24.
Video recorder indicators show the following:
• The device memory
(
) and memory card
( ) indicators (1)
show where the video
is saved.
show where the video
is saved.
• The current video
length indicator (2)
shows elapsed time
and time remaining.
shows elapsed time
and time remaining.
• The shooting mode
indicator (3) shows
the active shooting
mode.
the active shooting
mode.
• Image stabilizer (4) indicates that the image stabilizer
is active, and dampens the effects of small movements
on the image sharpness (main camera only).
on the image sharpness (main camera only).
R1113_en.book Page 27 Friday, November 25, 2005 12:49 PM