Справочник Пользователя для Agrident Corporation AWR100

08/10/2007 

Vertraulich / Confidential 

Page 13 of 31 

 

 

 

 

If Bluetooth is activated, the internal Bluetooth adapter is initialised first. 
In this case the following dialog appears on the LCD display: 
 
 
 
 
 
After Stick Reader is ready to work, the following text appears on the top left side of the LCD  
display: 
 
 
 
   
 
 
If Bluetooth is activated and connected, a Bluetooth symbol appears on the right side of the  
second line. 
 
 
 
 
 
The backlight of the LCD display is off. 
If no actions take place, the Stick Reader will be deactivated after a certain time  
(5s…600s configurable). 
 

Wait until 
 
 
 
 
 
appears on the LCD display. 
 
Press key until 
 
 
 
 
 
appears on the LCD display. Release key. 
Now the Stick Reader starts to read transponders for a certain time (configurable). 
The reading procedure is signalled by a red flashing LED. Furthermore a progress bar appears 
in the second line of the LCD display. 
The flashing of the red LED can enabled and disabled by configuration software. 
If no transponder has been read, the following message appears on the first line of the LCD  
display: 
 
 
 
 
 
During displaying this message the backlight of the LCD display is on. 
If a transponder has been read, the reading procedure is aborted immediately. 
A successful reading is signalled by a green flashing LED at the top of the Stick Reader, a  
flashing blue LED above the LCD display, and the beeper. 
The flashing of the green LED and the BEEPER can be enabled and disabled by configuration 
software. 
 
 

Press key