Справочник Пользователя для Agrident Corporation AWR100

08/10/2007 

Vertraulich / Confidential 

Page 16 of 31 

 

 

 

 

 

 
This option is only available, if the corresponding Bluetooth adapter is connected to the Stick 
Reader. 
The status of the Bluetooth interface appears on the second line of the LCD interface (on or off): 
 
 
 
 
 
The arrow in front of the status is a hind, that this status can be changed by pressing the key. 
In this case the Bluetooth interface is deactivated by pressing the key and the following mes-
sage appears: 
 
 
 
 
 
If the key is pressed again, the Bluetooth interface is activated again. 
Switching off the Bluetooth module minimizes power consumption and increases life time of the 
used battery. 
This option is useful if the Stick Reader is only used for sampling transponders, and the stored 
datasets will be read out later in the office. 
 

This option is only available, if the corresponding Bluetooth adapter is connected to the Stick 
Reader and Bluetooth is activated (see chapter 4.3.5). 
The following text appears on the second line of the LCD interface: 
 
 
 
 
 
Before the Stick Reader is able to communicate via Bluetooth, both Bluetooth devices have to 
be paired. 
Press the read button if ->Start pairing appears on the LCD display, to start the pairing 
process. 

After pairing process was started some information's appear on the LCD display: 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
These informations are only status informations of the Bluetooth module. 
After starting the pairing process on the Stick Reader, the Bluetooth environment of the PC has 
to be used to scan for Bluetooth modules in range.