Справочник Пользователя для Agrident Corporation AWR100

Скачать
Страница из 31
08/10/2007 
Vertraulich / Confidential 
Page 30 of 31 
 
 
 
AWR100
 
7.  Safety and care 
The manufacturer accepts no liability for damage resulting from improper use or use not consis-
tent with that described in these operating instructions. 
 
•  The AWR100 Reader contains no parts that can be repaired by the user. For this reason the 
Reader Electronic may only be repaired by authorised customer service personnel. 
 
 
•  In both operation and storage of the reader please secure to comply with the environment 
conditions specified in the technical data. 
 
 
•  Clean the AWR100 Reader only with a damp cloth. Use only water and any commercially 
available cleaning agent. 
 
•  If the stickreader is not used for a longer time, the battery should be taken out of the Stick-
reader. The battery should be stored dry and cool separately. 
 
 
Any modification to the AWR100 Reader will render the warranty null and void. 
 
8. Warranty 
The manufacturer of the AWR100 Reader will provide a warranty of  
 
12 months 
 
from the day the device is shipped and subject to the following conditions: 
 
a.  Without submission of proof of purchase no warranty can be given. 
b.  In the event that defects are detected the manufacturer is entitled to choose between up to 
two attempts at repair or supplying a replacement device on one occasion. The warranty pe-
riod for the repaired item or for a replacement item is 3 months but will always extend to the 
end of the original warranty period. No further claims can be entertained, especially claims 
for compensation for consequential losses. This exclusion of liability does not apply to claims 
made on the basis of the Product Liability Act. 
c.  Warranty claims cannot be entertained unless the Agrident system was installed properly 
and used properly and for the purpose intended. 
 
No warranty obligations exist in particular when: 
 
1.  Damage is attributable to improper use of the device, to a incorrect connection or incorrect 
operator action; 
2.  The device was not cared for and maintained in accordance with the manufacturer's recom-
mendations and this is the cause of the damage; 
3.  The damage is due to any modification to the device; 
4. 
The damage is due to force majeure, for example, lightning strike;
 
5.  The damage is due to wear resulting from overstressing mechanical parts.