Справочник Пользователя для International Police Technologies TR9
GREEN indicating “charge in progress”. The GREEN LED
will turn off when the battery reaches a FULL charge.
will turn off when the battery reaches a FULL charge.
3. Top
microphone
– When the top microphone is selected by
the switch (#5 on diagram) this microphone will be active
and transmitted. This microphone should be selected when
using the transmitter clipped on the front of the shirt, in a
holster or in a shirt pocket.
and transmitted. This microphone should be selected when
using the transmitter clipped on the front of the shirt, in a
holster or in a shirt pocket.
4. External Microphone Jack – This high quality jack is for use
with a corded-type lavaliere clip-on microphone. When the
microphone is plugged into the jack, the transmitter
automatically recognizes the microphone and switches off
the built-in microphones.
microphone is plugged into the jack, the transmitter
automatically recognizes the microphone and switches off
the built-in microphones.
5. Top / Bottom microphone switch – This position of this
switch determines which built-in microphone will be active.
When the switch is in the up position, the top microphone
will be active. When the switch is in the lower position, the
lower microphone will be active. Simply push the switch
towards the microphone you want to use.
When the switch is in the up position, the top microphone
will be active. When the switch is in the lower position, the
lower microphone will be active. Simply push the switch
towards the microphone you want to use.
6. Bottom
microphone
– Use this microphone when clipping
the transmitter to your lapel or epaulette. The antenna will
face the rear and the microphone will be facing forward and
down. (Appropriate for traffic stops.)
face the rear and the microphone will be facing forward and
down. (Appropriate for traffic stops.)
7. Remote Function Activation Switches – Each switch will
operate a separate function depending upon the particular
installation in the car. Common functions are: light bar &
siren activation, remote operation of PA in car, car engine
kill, trunk latch, and door lock / unlock or dog release.
installation in the car. Common functions are: light bar &
siren activation, remote operation of PA in car, car engine
kill, trunk latch, and door lock / unlock or dog release.
8. Antenna
– This is a ¼ wave rubber duck antenna to transmit
the RF signal to the receiver.