Справочник Пользователя для Intermarketing Ltd. 60204007

 7

Landauer

Aurion

TM

 Reference Guide

•  Select [Save Changes]. A series of dialog boxes appear indicating the progress of the

transfer. Do not disconnect or use the display unit while transfer of configuration data is
in progress.

6. 

 Each dosimeter must

complete a performance check before use
for the first time.

•  Remove the red unassigned card from

the dosimeter and place the dosimeter
face down on the display unit in the
read out area.

•  After the display unit screen displays

“Pass”, insert a participant smart card and activate the dosimeter by placing the
dosimeter face down on the display unit in the read out area.

•  Wait for the “Activated” message on the display unit screen. The dosimeter is now

ready to wear.

7. 

 Read out dosimeter:

  After use, read out dosimeter by placing the dosimeter (with smart

card inserted) face down on the display unit in the read out area. The display unit message
screen displays the monitored dose and the integrated dose on separate screens
sequentially.

8.

 Transfer exposure records from the display unit to the web site to create

dose reports. During the data transfer process, Landauer downloads software from
Landauer’s web site and installs the software on the computer used to transfer exposure
data from the display unit to the web site.  Administrative privilege for the computer used
to transfer data is required to successfully download and install this software, and you may
need to contact your network/information services administrator for assistance.

•  Connect the display unit to your personal computer as described in step 4.
•  Go to Landauer’s web site www.landauerinc.com. Select E-Solutions and Aurion to log-

in using the ID and password assigned to your account by Landauer.

•  Turn on the display unit. Wait for the “Ready” screen on the display unit.
•  Select the Transfer Data link on Aurion’s sidebar menu. Select [Yes] to a series of

installation dialog boxes that may appear.

•  Select [Upload Display Unit Data]. A series of dialog boxes appear indicating the

progress of the transfer. Do not disconnect or use display unit while data transfer is in
progress.

9.  

Create dose reports: 

Create dose reports at Landauer’s web site.

•  Go to Landauer’s web site www.landauerinc.com. Select E-Solutions and Aurion to log-

in using the ID and password assigned to your account by Landauer.

•  Select the Dose Reports link on Aurion’s sidebar menu.
•  Select the report criteria.
•  Select [Generate Report].

10. 

 Deactivating a dosimeter after each use is not necessary unless

there is a change in assignment. After an assignment*, deactivate the dosimeter by
removing the smart card and placing the empty dosimeter face down on the display unit in
the read out area. Follow the instructions on the display unit screen.

* An assignment may be as short as a task for a visitor, a larger unit of time for a temporary

assignment, or as long as six months for a permanent assignment.