Справочник Пользователя для Huawei Technologies Co. Ltd RRU3260

This section describes the procedure and precautions for installing the RRU on a wall.

The hoist clamp on the main bracket is secured properly.

l Do not stand the RRU upright because the RF ports cannot support the weight of the RRU.
l Place a foam pad or cardboard under the RRU to protect the RRU housing from damage

during the installation.

The wall on which RRUs are installed must meet the following requirements:
l

When a single RRU is installed, the wall must be capable of bearing at least four times the
weight of the RRU.

l

Expansion anchor bolts must be tightened to 30 N·m (265.52 lbf·in.) so that the bolts stay
secured without damaging the wall.

Step 1 Disassemble the RRU mounting brackets, as shown in 

RRU3260
Installation Guide

8 Installing the RRU

Issue ()

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

77