Справочник Пользователя для Saitek Electronics Ltd DM08
POWERING UP THE A-250
iFREEDOM
Open the battery compartment on the bottom of your Saitek A-250 iFreedom
Speaker unit.
Insert four AA batteries in the direction shown.
Replace the battery compartment cover.
Press the “ ” button for one second.The button should glow green and the LCD
screen will illuminate.
You can also power the speaker unit using the supplied AC power Adapter.
Speaker unit.
Insert four AA batteries in the direction shown.
Replace the battery compartment cover.
Press the “ ” button for one second.The button should glow green and the LCD
screen will illuminate.
You can also power the speaker unit using the supplied AC power Adapter.
CONNECTING THE
WIRELESS TRANSMITTER
In iiPod/MP3 pplayer m
mode
You can connect the Bluetooth® transmitter to the iPod/MP3 player to remotely
control and play your music from anywhere in the room.
Plug the mini jackplug on the wireless transmitter into the headphone out socket of
your iPod or other MP3 player. Press and hold the transmitter’s On/Off button for
two seconds to power up.The transmitter LED will slowly flash alternately red and
blue to show that it is looking for the speaker unit.
After a few seconds the display on the speaker unit will read “OK” and the wireless
transmitter will slowly flash blue to show that the wireless connection has been
established.
You are now able to play the music on your iPod or MP3 player through the speaker
unit. Simply select the track or playlist you want to hear and press play on your
iPod/MP3 player.
If for any reason the wireless connection between the transmitter and speaker is lost,
perform the following steps to re-establish a connection.
On the speaker unit, press and hold down the previous and next track buttons
for three seconds.The wireless symbol will flash rapidly to show that the unit is
trying to establish a connection and the display will read “OK” once the connection is
established.
Volume ssettings
To conserve battery life of both the speaker unit and your iPod or MP3 player, set the
the speaker unit volume to 5 and control the volume level from your iPod or other
MP3 player.
control and play your music from anywhere in the room.
Plug the mini jackplug on the wireless transmitter into the headphone out socket of
your iPod or other MP3 player. Press and hold the transmitter’s On/Off button for
two seconds to power up.The transmitter LED will slowly flash alternately red and
blue to show that it is looking for the speaker unit.
After a few seconds the display on the speaker unit will read “OK” and the wireless
transmitter will slowly flash blue to show that the wireless connection has been
established.
You are now able to play the music on your iPod or MP3 player through the speaker
unit. Simply select the track or playlist you want to hear and press play on your
iPod/MP3 player.
If for any reason the wireless connection between the transmitter and speaker is lost,
perform the following steps to re-establish a connection.
On the speaker unit, press and hold down the previous and next track buttons
for three seconds.The wireless symbol will flash rapidly to show that the unit is
trying to establish a connection and the display will read “OK” once the connection is
established.
Volume ssettings
To conserve battery life of both the speaker unit and your iPod or MP3 player, set the
the speaker unit volume to 5 and control the volume level from your iPod or other
MP3 player.
ENGLISH
DM08_QSG_Pilot.qxd 7/21/2006 1:19 PM Page 4