Справочник Пользователя для Saitek Electronics Ltd SZ02-1
After installing the batteries, the Hub will start
communicating with the Receiver automatically.
All the Hub LEDs will light up, and so will the green
Signal/Scan LED on the Receiver.
communicating with the Receiver automatically.
All the Hub LEDs will light up, and so will the green
Signal/Scan LED on the Receiver.
4
Install the Receiver into the game console’s ports
by lining it up carefully and inserting it gently, but
firmly. Now, power up the PlayStation®2.
by lining it up carefully and inserting it gently, but
firmly. Now, power up the PlayStation®2.
5
Plug up to 2 game controllers into Ports 1 and 2
of the Hub.
of the Hub.
The built-in auto-scan function allows 2
controllers to work at the same time.
Next, decide where you want to play. You can
position yourself anywhere within about 10
metres (approximately 30 feet) of the console.
Time to start up one of your PlayStation® games and
have some fun!
position yourself anywhere within about 10
metres (approximately 30 feet) of the console.
Time to start up one of your PlayStation® games and
have some fun!
6
Locate the rechargeable batteries provided with
your Wireless Adapter,
and insert them into the
Power Pack.
IMPORTANT: The Power
Pack must be charged
for at least 12 hours
your Wireless Adapter,
and insert them into the
Power Pack.
IMPORTANT: The Power
Pack must be charged
for at least 12 hours
before the initial use! For
charging details, see Section 2. If you want to play
right away, insert 4 fresh AA batteries into the spare
cartridge, and slide the cartridge into the front of the
Hub. It will lock into place when installed correctly.
Note that you can actually charge the Power Pack
while you’re playing with the second set of batteries!
right away, insert 4 fresh AA batteries into the spare
cartridge, and slide the cartridge into the front of the
Hub. It will lock into place when installed correctly.
Note that you can actually charge the Power Pack
while you’re playing with the second set of batteries!
3
GETTING CONNECTED: IT’S EASY!
Before you start, make sure that your
Sony PlayStation®2 is turned OFF!
Sony PlayStation®2 is turned OFF!
1
2
CAUTION:
Do not recharge
standard Carbon Zinc
or Alkaline batteries!