Справочник Пользователя для Sensors & Software Inc. NG250

Noggin

6-SmartHandle Assembly (Noggin 500 & 1000 only)

Figure: 6-5 Press the handle base straight down onto the four, silver mounting posts. The handle base

should be pushed all the way down onto the odometer bracket. Insert the four quick release pins to secure

the handle.

Figure: 6-6 The full-length SmartHandle is shown in Figure 6-1. The SmartHandle can be shortened by

removing the center handle section using the thumb-screws. Use the Velcro straps to secure the cable

onto the SmartHandle, ensuring there is excess cable near the connection at the Noggin to allow the

SmartHandle to pivot up and down without straining the cable.