Справочник Пользователя для Microsoft Corporation RM-200
G e t s t a r t e d
12
1. Get started
■ Install the SIM card and the battery
Always switch the device off and disconnect the charger before removing the
battery.
battery.
Keep all SIM cards out of the reach of small children.
For availability and information on using SIM card services, contact your SIM
card vendor. This may be the service provider, network operator, or other vendor.
card vendor. This may be the service provider, network operator, or other vendor.
This device is intended for use with the BP-6M battery.
The SIM card and its contacts can easily be damaged by scratches or
bending, so be careful when handling, inserting, or removing the card.
bending, so be careful when handling, inserting, or removing the card.
1. With the back of the phone facing
you, slide the back cover (1) to
remove it from the phone (2).
remove it from the phone (2).
2. To remove the battery, lift it as
shown (3).
3. To release the SIM card holder,
gently pull the locking clip of the
card holder, and open it (4).
Insert the SIM card into the SIM
card holder (5). Make sure that the
SIM card is properly inserted and
that the gold-colored contact area
on the card is facing downwards.
card holder, and open it (4).
Insert the SIM card into the SIM
card holder (5). Make sure that the
SIM card is properly inserted and
that the gold-colored contact area
on the card is facing downwards.
Close the SIM card holder (6), and
press it until it snaps into position.
press it until it snaps into position.