Справочник Пользователя для Microsoft Corporation RM-128

You can assign default numbers or addresses to a contact 
card. In this way if a contact has several numbers or 
addresses, you can easily call or send a message to the 
contact to a certain number or address. The default 
number is also used in voice dialing.

1 In 

, select a contact, and press 

.

2 Select 

> 

.

3 Select the number or address to which you want to 

add a default value, and select 

.

4 Select a number or an address you want to set as a 

default.

The default number or address is underlined in the contact 
card.

To create a contact group, do the following:

1 In 

, press 

 to open the groups list.

2 Select 

> 

. 

3 Write a name for the group or use the default name 

, and select 

. 

4 Open the group, and select 

> 

.

5 Scroll to a contact, and press 

 to mark it. To add 

multiple members at a time, repeat this action on all 
the contacts you want to add.

6 Select 

 to add the contact to the group.

To rename a group, select 

> 

, enter the 

new name, and select 

.

To add a contact to an existing contact group, select 

> 

 .

To remove contacts from a group, do the following:

1 In the groups list, open the group you want to modify.
2 Select the contact and 

> 

.

3 Select 

 to remove the contact from the group.

 Tip! To check to which groups a contact belongs, 

scroll to the contact, and select 

> 

.

When a contact or group member calls you, the device 
plays the chosen ringing tone (if the caller’s telephone 
number is sent with the call and your device recognizes it).

1 Press 

 to open a contact card or go to the groups list, 

and select a contact group.

2 Select 

> 

. A list of ringing tones 

opens.

3 Select the ringing tone you want to use for the 

individual contact or the selected group.

R1114_en.book  Page 70  Thursday, October 19, 2006  3:43 PM