Справочник Пользователя для Epson EB-1760W V11H361041

a

• If  Password  Protect  is  already  activated,  you  must  enter  the

password.
If  the  password  is  entered  correctly,  the  Password  Protect
setting  menu  is  displayed.

s

• When the password is set, stick the supplied password protect

sticker  in  a  visible  position  on  the  projector  as  a  further  theft
deterrent.

b

Select  the  type  of  Password  Protect  you  want  to  set,  and  then
press  the  [Enter]  button.

c

Select   On,  and  then  press  the  [Enter]  button.

Press  the  [Esc]  button,  the  screen  displayed  in  step  2  is  displayed
again.

d

Set  the  password.

(1)

Select Password, and then press the [Enter] button.

(2)

When the message "Change the password?" is displayed, select Yes and
then press the [Enter] button. The default password is set to "0000".
Change this to your own desired password. If you select No, the screen
displayed in step 2 is displayed again.

(3)

While holding down the [Num] button, enter a four digit number using
the numeric buttons. The number entered is displayed as "* * * *". When
you enter the fourth digit, the confirmation screen is displayed.

Remote control

(4)

Re-enter the password.
The message "Password accepted." is displayed.
If you enter the password incorrectly, a message is displayed prompting
you to re-enter the password.

When  the  password  entry  screen  is  displayed,  enter  the  password  using  the
numeric  buttons  on  the  remote  control.

While  holding  down  the  [Num]  button,  enter  the  password  by  pressing  the
numeric  buttons.