Справочник Пользователя для Epson EB-1760W V11H361041

Submenu

Function

Wireless LAN
Power

Turn On when connecting the projector to the computer over
wireless LAN.
If you do not want to connect via wireless LAN, turn it Off to
prevent unauthorized access by others.
This is set to On by default.

Connection
Mode

Set the connection mode when using EasyMP Network
Projection to connect the projector and computer.
This is set to Quick by default.
See the following manual for details on connection mode.

s

 

Channel

(This can only be set if Connection Mode is set to Quick.)
Select the frequency band used by the wireless LAN from 1ch,
6ch

, or 11ch.

This is set to 11ch by default.

Submenu

Function

Wireless LAN
Sys.

Set the Wireless LAN system to either 802.11b/g or
802.11b/g/n

.

This is set to 802.11b/g by default.

SSID Auto Set‐
ting

Set to On to reduce the projector search time when connecting to
a network using Quick from Connection Mode.
Set to Off when connecting to multiple projectors at the same
time.
This is set to On by default.

SSID

Enter an SSID

. When an SSID is provided for the wireless LAN

system in which the projector participates, enter the SSID.
You can enter up to 32 single-byte alphanumeric characters.

IP Settings

You can make network settings.
DHCP

: Set to On to make network settings using DHCP

is set to On, you cannot set any more addresses.
IP Address

: You can input the IP address

 assigned to the

projector. You can enter a number from 0 to 255 in each field of
the address. However, the following IP addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
Subnet Mask

: You can input the subnet mask

You can enter a number from 0 to 255 in each field of the address.
However, the following subnet masks cannot be used.
0.0.0.0, 255.255.255.255
Gateway Address

: You can input the IP address for the gateway

for the projector. You can enter a number from 0 to 255 in each
field of the address. However, the following gateway addresses

cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)

SSID Display

To prevent the SSID

 from being displayed on the LAN Standby

screen, set this to Off.

IP Address Dis‐
play

To prevent the IP address

 from being displayed on the LAN

Standby screen, set this to Off.