Справочник Пользователя для 3e Technologies International Inc. 527A3

The 3e–527A3 comes with the capability to be configured as an ac-

cess point. As it incorporates two separate 802.11 wireless cards, one for 

configuring a local WLAN and one for use in bridging, it can also be 

configured for bridging, either with access point or gateway configuration 

on the WLAN side. Configuration as a gateway is discussed in Chapter 4 

and configuration for bridging is discussed in Chapter 5.

For preliminary installation the 3e–527A3 network administrator may 

need the following information:

•  IP address – a list of IP addresses available on the organization's 

LAN that are available to be used for assignment to the AP(s)

•  Subnet Mask for the LAN

•  Default IP address of the 3e–527A3

•  DNS IP address

•  SSID – an ID number/letter string that you want to use in the con-

figuration process to identify all members of the wireless LAN. 

•  The MAC addresses of all the wireless cards that will be used to 

access the 3e–527A3 network of access points (if MAC address 

filtering is to be enabled)

•  The appropriate encryption key for Static 3DES or Static AES if 

state-of-the art key management will be used.