Справочник Пользователя для 3e Technologies International Inc. 527A3

To configure the 3e–527A3 in gateway mode, complete the following 

steps. 

1.  Login on to the 3e–527A3 (see Chapter 3, page 21).

2.  Using the  navigation bar to the left, navigate to the System Con-

screen, select the Gateway Mode 

radio button, and click Apply. The 3e–527A3 AP will reboot in 

gateway mode.

Note that if you change modes from AP to Gateway, your configura-

tion is not lost.

You can then proceed to change the management screens as necessary 

to reconfigure the device as a gateway.  Configuration in gateway mode 

allows you to set firewall parameters. This is the main difference between 

the screens you will see in gateway mode and those covered in access 

point setup as discussed in Chapter 3.

The following sections only cover the functions and screens that are 

unique to the gateway mode. All of the screens that are common to both 

the AP and Gateway modes are covered in Chapter 3.