Справочник Пользователя для 3e Technologies International Inc. 531AP
3e-531AP Wireless Access Point
Chapter 1: Introduction
29000125-001 C
3
Wireless Basics
Wireless networking uses electromagnetic radio frequency waves to
transmit and receive data. Communication occurs by establishing radio
links between the wireless gateway and devices confi gured to be part of
the WLAN.
The 3e-531AP incorporates the 802.11b (Wi-Fi) standard and the most
state of the art encryption for a very powerful and secure wireless envi-
ronment.
802.11b
The IEEE 802.11b standard, developed by the Wireless Ethernet
Compatibility Alliance (WECA), establishes a stable standard. A user with
an 802.11b product can use any brand of gateway/access point with any
other brand of client hardware that is built to the 802.11b standard for ba-
sic interconnection. 802.11b devices provide 11 Mbps transmission (with a
fallback to 5.5, 2 and 1 Mbps depending on signal strength) in the 2.4 GHz
band.
802.11b uses DSSS (direct-sequence spread spectrum) for radio com-
munication. Direct-sequence systems communicate by continuously
transmitting a redundant pattern of bits called a chipping sequence. The
chipping sequence is combined with a transmitted data stream to produce
the wireless output signal.
For wireless devices to communicate with the 3e-531AP, they must
meet the following conditions:
• The signal strength must be suffi cient;
• The wireless device and wireless gateway must have been confi g-
ured to recognize each other using the SSID (a unique ID assigned
in setup so that the wireless device is seen to be part of the net-
work by the 3e-531AP);
• Encryption and authentication capabilities and types enabled
must conform;
• The wireless device and wireless gateway must have compatible
data rate confi gurations; and
• If MAC fi ltering is used, the 3e-531AP must be confi gured to
allow the wireless device’s MAC address to associate (communi-
cate) with the 3e-531AP wireless interface.