Справочник Пользователя для 3e Technologies International Inc. 531AP

• Access to at least one laptop or PC with an Ethernet card 

and cable that can be used to complete the initial con fi g u-

 ra tion of the unit. (The cable required will have a standard 

RJ-45 connector on one end and a circular connector on the 

other.)

• A Web browser program (such as Microsoft Internet Explor-

er 5.5 or later, or Netscape 6.2 or later) in stalled on the PC or 

laptop you will be using to confi gure the Gateway.

• TCP/IP Protocol (usually comes installed on any Windows 

PC.)

The 3e-531AP is well-protected in a met al enclosure which is gen-

 er al ly bolted to the bulk head. The front of the box is hinged but should 

not be opened, particularly if being employed as FIPS 140-2 compatible 

device.

The fol low ing il lus tra tion shows the external cabling on the 3e-531AP. 

However, even if the On-off switch is “on”, if the lid of the de vice is 

opened, power will cease to fl ow be cause of the  safe ty in ter lock.

An AC Power Con nec tor (not provided) can be plugged into an AC 

outlet. In some situations, the in stal la tion design may include elimination 

of the ability to plug the unit into an AC outlet. In such circumstances, the 

AC power is supplied (that is, hardwired) using the same AC Power Con-

nector port. Usually, in the default confi guration of the 3e-531AP, the AC 

Pow er Con nec tor is not ac tive ly used. The socket outlet must be installed 

near the equipment and be easily accessible.

The Ethernet Up link con nec tor is used to connect the 3e-531AP to the 

ship board LAN. When used as a PoE device, the Ethernet Uplink con-

 nec tor will have been routed from the unit to a PoE-capable hub switch 

which runs the power through the Ethernet cable to the unit. The Ethernet