Справочник Пользователя для 3e Technologies International Inc. 531AP

Next, click the entry on the left hand navigation panel for System 

. You will be directed to the System Confi guration 

 page.

This screen allows you to set Link Speed and Duplex of the WAN 

port.  If you select a choice other than Auto (the default), the 3e-531AP 

will use only the selected link speed (10 Mbits/sec or 100 Mbits/sec) and 

Duplex (Half Duplex transfers or Full Duplex transfers) that you select in 

the WAN/LAN Link dropdown menu.

If not using DHCP to get an IP address, input the in for ma tion that the 

access point re quires in order to allow the wire less devices it con trols ac-

cess to the wired LAN.  This will be the IP address, Subnet Mask, Default 

Gateway, and, where needed, DNS 1 and 2. 

Click Apply to accept changes.