Справочник Пользователя для 3e Technologies International Inc. 531AP

The default factory setting for the 3e-531AP is no encryption. It is 

recommended that you set encryption as soon as possible. If your mode 

setting includes FIPS 140-2 mode, WEP encryption is not an option. WEP 

will appear as an option in AP mode if not using the ultra-secure FIPS 

140.2 encryption settings.

Dynamic key management requires the installation of the 3e-030 Secu-

rity Server software which resides on a self-contained workstation con-

nected to the 3e-531AP over the Ethernet Uplink WAN port.  The Security 

Server software confi guration includes: obtaining a root certifi cate from 

a Certifi cate Authority (CA) like Microsoft; obtaining user certifi cates 

based on the CA which will be used by the clients; and confi guring the 3e 

Technologies International's Security Server software with the appropri-

ate root certifi cate. The Security Server software application is discussed 

in a separate manual.

If you have installed the Security Server software, Dynamic Key 

Management is the preferred security setup. Get the IP Address and 

password of the Security Server and the Key type. Key type will be either 

3DES (192-bit), or AES (128-bit, 192-bit or 256-bit). Thereafter, the Security 

Server handles authentication dynamically.

If you do not have a Security Server installed, the 3e-531AP can ac-

commodate static encryption using either AES or 3DES. 

To use 3DES, enter a 192-bit key as 48 hexidecimal digit (0-9,a-f, or 

A-F).