Справочник Пользователя для 3e Technologies International Inc. 531AP

The Wireless Confi guration — Bridging screen is used to enable/

disable Wireless Client Access and Spanning Tree Protocol and to con-

fi gure the BSSID of the peer bridges. This page is important in setting 

up your bridge confi guration. We recommend that you disable Wireless 

Client Access for all bridge setups except repeater. Spanning Tree Protocol 

should be enabled if there is any possibility that a bridging loop could oc-

cur. If you are certain that there is no possibility that a bridging loop will 

occur, you should disable Spanning Tree Protocol, because the bridge will 

be more effi cient (faster) without it. However, if not sure, the safest solu-

tion is to enable Spanning Tree Protocol.

The Wireless Confi guration — Bridging Encryption page is used to 

confi gure static encryption keys for the wireless bridge. This is an impor-

tant page to set up to ensure that your bridge is working correctly. The en-

cryption key that you use on this screen must be the same for any bridge 

connected to your bridging network in order for communication to occur. 

And on this screen, you can only select either a static 192 bit 3DES key or 

an AES key of either 128-bit, 192-bit, or 256-bit.

: You can also select to leave encryption OFF, but this is not 

recommended.