Справочник Пользователя для Barco AMM215MWTD

To make your installation easier, the monitor is able to Plug and Play with your 

system if your system also supports DDC protocol. The DDC (Display Data 

Channel) is a communication protocol through which the monitor automatically 

informs the host system  about its capabilities, for example, supported resolutions 

and corresponding timing. The monitor supports DDC1 and DDC2B standard.

To install the monitor to your host system, please follow the steps as given below:
Steps
1. Use the supplied cable (DVI, VGA, USB*) then connect to the 

  host system accordingly.

2. Connect the DC power to the DC power connector on the monitor.
3. Connect one end of AC power cord into the AC Adapter and the other end to AC 

  power outlet.

4. Then turn the host system on and then the monitor.
5. If the monitor still does not function properly, please refer to the troubleshooting 

  section to diagnose the problem.

14    User’s Guide

DVI

VGA

DC Power

USB*

*Only available for touch models