Справочник Пользователя для Honeywell International Inc. VM2W02
Rev. (a)
l
Always route the cable so that it does not interfere with safe operation and maintenance of the vehicle.
l
Provide mechanical support for the cable by securing it to the vehicle structure at approximately one foot intervals,
taking care not to over tighten and pinch conductors or penetrate outer cable jacket.
5. Connect the DC power cable to the input connector on the back of the Dock.
6. Flip the power switch on the back of the Dock to On.
7. The Thor VM2WG can be installed in the Dock.
8. If using the
6. Flip the power switch on the back of the Dock to On.
7. The Thor VM2WG can be installed in the Dock.
8. If using the
, install the screen blanking box or switch.
Wiring Diagram
1. Existing Circuitry on Vehicle
2. Forklift Battery
3. Main Switch
4. 10A Slow blow Fuse close to power source
5. Isolated DC/DC Power Supply
6. Red Wire (DC +)
2. Forklift Battery
3. Main Switch
4. 10A Slow blow Fuse close to power source
5. Isolated DC/DC Power Supply
6. Red Wire (DC +)
7. Black Wire (DC -)
8. Green Wire (Ground)
9. Blue Wire (not connected)
8. Green Wire (Ground)
9. Blue Wire (not connected)
10. Thor VM2WG Computer in Quick Mount
Smart Dock
11. COM1 or COM2 Connector on Dock
12. Circular Power Connector on Dock
12. Circular Power Connector on Dock
3-15