Справочник Пользователя для Cisco Aironet 6-dBi Patch Antenna AIR-ANT2460P-R

Before attempting to install your antenna, determine where you can best place the antenna for safety and
performance.

Follow these steps to determine a safe distance from wires, power lines, and trees.

Measure the height of your antenna.

Add this length to the length of your tower or mast and then double this total for the minimum
recommended safe distance.

If you are unable to maintain this safe distance, stop and get professional help.

Generally, the higher an antenna is above the ground, the better it performs. Good practice is to install
your antenna about 5 to 10 ft (1.5 to 3 m) above the roof line and away from all power lines and
obstructions. If possible, find a mounting place directly above your wireless device so that the lead-in
cable can be as short as possible.

You can install the antenna on any flat vertical surface or on a mast using the optional mast mounting
plate. Hardware for mounting the antenna on drywall is provided. If you intend to install your antenna
on another surface, you must provide the appropriate hardware.

Four mounting screws are provided to mount the antenna. To ensure a safe, reliable, and long-standing
installation, you must use all four screws to mount the antenna.

If you install the antenna outdoors, follow the instructions printed on the back of the antenna.

An installation kit is shipped with the antenna and consists of the following hardware:

Four #8 x   Phillips head screws

Four #8 plastic anchors

Four end caps

You need the following tools and equipment, which are not provided.

A Phillips screwdriver

A drill