Справочник Пользователя для BlackBerry RHJ80UW

Скачать
Страница из 2
For information about returning your smartphone and accessories to BlackBerry for recycling and safe disposal, from a browser on your 
computer, visit 
 or 
certain areas.
If these programs are not offered in your area, check with your local government for regulations regarding the proper disposal of electronic 
products.
Dispose of your smartphone and its battery in accordance with the laws and regulations in your area governing disposal of such cell types.
Compliance information
Exposure to radio frequency signals
The smartphone radio is a low-power radio transmitter and receiver. It is designed to comply with Federal Communications Commission 
(FCC) guidelines and limits, as well as other relevant international guidelines regarding safety levels of radio frequency exposure for wireless 
devices. These guidelines were developed by independent scientific experts, governments, and organizations including the Institute of 
Electrical and Electronics Engineers Standard (IEEE) and National Council on Radiation Protection and Measurements (NCRP).
To maintain compliance with FCC and other relevant international radio frequency exposure guidelines and limits, keep the smartphone at 
least 0.59 in. (1.5 cm) away from your body. When you carry the smartphone on your body, use only accessories equipped with an integrated 
belt clip that are supplied or approved by BlackBerry. If you use a body-worn accessory not supplied by BlackBerry, verify that the accessory 
does not contain metal and keep the smartphone at least 0.59 in. (1.5 c m) from your body.
To reduce radio frequency exposure: (i) use the smartphone in areas where there is a strong wireless signal; (ii) use hands-free options; and 
(iii) reduce the amount of time spent on calls, or send an email, text message, or BBM message instead.
Specific absorption rate data
THIS WIRELESS DEVICE MODEL MEETS GOVERNMENT REQUIREMENTS FOR EXPOSURE TO RADIO WAVES WHEN USED AS DIRECTED IN 
THIS SECTION.
The smartphone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the 
Federal Communications Commission (FCC) of the U.S. Government when used as directed in the previous section. These limits are part of 
comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that 
were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The exposure 
standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 
1.6W/kg*. Tests for SAR are conducted using standard operating positions specified by the FCC with the device transmitting at its highest 
certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level 
of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power 
levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower 
the power output.
The highest SAR value for this smartphone when tested for use at the ear is:
Smartphone
SAR (W/kg) for 1 g
BlackBerry Z3 STJ100-2 smartphone (model number RHJ81UW)
0.46
The highest SAR value for this smartphone when tested both in a BlackBerry approved holster with an integrated belt clip and at a distance 
of 0.59 inch (1.5 cm) from the body, is:
Smartphone
SAR (W/kg) for 1 g
BlackBerry Z3 STJ100-2 smartphone (model number RHJ81UW)
1.17
When operating in Mobile Hotspot mode, the highest SAR value for this smartphone, when tested in a BlackBerry approved holster with an 
integrated belt clip, is:
Smartphone
SAR (W/kg) for 1 g
BlackBerry Z3 STJ100-2 smartphone (model number RHJ81UW)
1.17
Body-worn measurements (recommended separation distances) differ among wireless devices, including smartphones, depending upon 
supplied or available accessories and applicable FCC requirements.
The FCC has granted an Equipment Authorization for this smartphone based on reported SAR levels complying with the FCC radio frequency 
emission guidelines when the smartphone is used as directed in this section. SAR information for this smartphone is on file with the FCC and 
 after searching for the FCC ID for your smartphone listed below.
Smartphone
FCC ID
BlackBerry Z3 STJ100-2 smartphone (model number RHJ81UW)
L6ARHJ80UW
 (CTIA - The Wireless Association), or 
(Telecommunications Bureau of the Ministry of Internal Affairs and Communications).
___________________________________
* In the United States and Canada, the SAR limit for mobile devices used by the public is 1.6W/kg averaged over 1 g of tissue for the body or 
head (4.0W/kg averaged over 10 g of tissue for the extremities - hands, wrists, ankles, and feet).
FCC compliance statement (United States)
FCC Class B Part 15 
This smartphone complies with Part 15 of the Federal Communications Commission (FCC) Rules. Operation is subject to the following two 
conditions: (1) this smartphone may not cause harmful interference, and (2) this smartphone must accept any interference received, 
including interference that may cause undesired operation.
Caution: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority 
to operate this equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These 
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, 
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instructions, may cause 
interference harmful to radio communications.
There is no guarantee, however, that interference will not occur in a particular installation. If this equipment does cause harmful interference 
to radio or television reception, which can be determined by turning on and turning off the equipment, the user is encouraged to try to 
correct the interference by one or more of the following measures: reorient or relocate the receiving antenna, increase the separation 
between the equipment and receiver, connect the equipment to an outlet on a circuit different from that to which the receiver is connected, 
or consult the dealer or an experienced radio or TV technician for help.
US Information Concerning the Federal Communications Commission ("FCC") Requirements for Hearing Aid 
Compatibility with Wireless Devices
When wireless devices are used near hearing devices (such as hearing aids and cochlear implants), users may detect a buzzing, humming, 
or whining noise. Some hearing devices are more immune than others to this interference, and wireless devices also vary in the amount of 
interference that they generate.
The wireless telephone industry has developed ratings to assist hearing device users in finding wireless devices that may be compatible with 
their hearing devices. Not all wireless devices have been rated. Wireless devices that are rated will have the rating displayed on the box 
together with other relevant approval markings.
The ratings are not guarantees. Results will vary depending on the user's hearing device and hearing loss. If your hearing device is vulnerable 
to interference, you may not be able to use a rated wireless device successfully.
Consulting with your hearing health professional and testing the wireless device with your hearing device is the best way to evaluate it for your 
personal needs.
How the ratings work
M-Ratings: Wireless devices rated M3 or M4 meet FCC requirements and are likely to generate less interference to hearing devices than 
wireless devices that are not labeled. M4 is the better or higher of the two ratings.
T-Ratings: Wireless devices rated T3 or T4 meet FCC requirements and are likely to be more usable with a hearing device's telecoil ("T 
Switch" or "Telephone Switch") than unrated wireless devices. T4 is the better or higher of the two ratings. (Note that not all hearing devices 
have telecoils in them.)
Hearing devices may also be measured for immunity to this type of interference. Your hearing device manufacturer or hearing health 
professional may help you find results for your hearing device. The more immune your hearing aid is, the less likely you are to experience 
interference noise from wireless devices.
For more information about the actions that the FCC has taken with regard to hearing aid compatibility with wireless devices and other steps 
Additional regulatory conformance
Specific details about compliance to the standards and regulatory bodies for your smartphone may be obtained from BlackBerry.
To view FCC ID, IC Certification Number, model, and compliance information for your smartphone, swipe down from the top of the home 
screen. Tap Settings > About, and select Regulatory Approvals from the drop-down list.
Product information: BlackBerry Z3 STJ100-2 smartphone
Mechanical properties:
• Weight: approximately 5.8 oz (164 g) including lithium-ion cell battery
• Size (L x W x H): 5.5 x 2.9 x 0.4 in. (140 x 72.8 x 9.26 mm)
• 1.5 GB memory, 8 GB application storage, microSD card slot
Power specifications:
• Non-removable, rechargeable lithium-ion cell battery
• Supports 3V, 1.8V micro SIM cards
• Port compatibility for data synchronization and charging: micro USB 2.0
Mobile network radio specifications:
• GSM band support: GSM 850, GSM 900, DCS 1800, PCS 1900 MHz bands
• HSPA+ band support: UMTS 850, UMTS 1900, UMTS 2100 MHz bands
• Power class: Class 1 (DCS 1800, PCS 1900), Class 3 (UMTS), Class 4 (GSM 850) as defined in GSM 5.05, Class 4 (GSM 900) as defined in 
GSM 02.06, Class E2 (GSM 850, GSM 900, DCS 1800, PCS 1900)
• Transmitting frequency: 824 to 849 MHz, 880 to 915 MHz, 1710 to 1785 MHz, 1850 to 1910 MHz, 1920 to 1980 MHz
• Receiving frequency: 869 to 894 MHz, 925 to 960 MHz, 1805 to 1880 MHz, 1930 to 1990 MHz, 2110 to 2170 MHz
Wi-Fi network radio specifications: 
• Wireless LAN standard: IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
• Transmitting and receiving frequency: 2.412 to 2.462 GHz
Bluetooth radio specifications:
• Single-band support: ISM 2.4 GHz
• Transmitting and receiving frequency: 2402 to 2480 MHz
• Bluetooth Class 1.5
Legal notice
©
2014 BlackBerry. All rights reserved. BlackBerry® and related trademarks, names and logos are the property of BlackBerry Limited and are 
registered and/or used in the U.S. and countries around the world. ANSI is a trademark of the American National Standards Institute. 
Bluetooth is a trademark of Bluetooth SIG. CTIA - The Wireless Association is a trademark of CTIA - The Wireless Association. GSM is a 
trademark of the GSM MOU Association. IEEE Std 1725, IEEE, 802.11b, 802.11g, and 802.11n are trademarks of the Institute of Electrical 
and Electronics Engineers, Inc. LTE and UMTS are trademarks of European Telecommunications Standards Institute (ETSI). Wi-Fi is a 
trademark of the Wi-Fi Alliance. All other trademarks are the property of their respective owners. This documentation including all 
provided "as is" and without condition, endorsement, guarantee, representation or warranty, or liability of any kind by BlackBerry Limited 
and its affiliated companies, all of which are expressly disclaimed to the maximum extent permitted by applicable law in your jurisdiction.
The terms of use of any BlackBerry product or service are set out in a separate license or other agreement with BlackBerry applicable 
thereto. NOTHING IN THIS DOCUMENTATION IS INTENDED TO SUPERSEDE ANY EXPRESS WRITTEN AGREEMENTS OR WARRANTIES 
PROVIDED BY BLACKBERRY FOR PORTIONS OF ANY BLACKBERRY PRODUCT OR SERVICE OTHER THAN THIS DOCUMENTATION.
BlackBerry Limited
2200 University Avenue East
Waterloo, Ontario
Canada N2K 0A7
BlackBerry UK Limited
200 Bath Road
Slough, Berkshire SL1 3XE
United Kingdom
Published in Canada