Справочник Пользователя для Continental Conair Limited GH5811

Prepare By: Dreamis So

P.20

29/3/2004

T O

N E / P

► D E

A U

3. Press “PROG/FLASH” again to enter the DEFAULT setting item.
4. You can choose YES/NO by pressing VOL/SCROLL “▲”, “▼” to choose the

default setting or not.

Y E

► N O

5. Press “PROG/FLASH” to confirm the setting and press EXIT to leave the

program menu.

Telephone Operation

Making a Call
1. Lift the handset and press the “TALK” or “SPEAKERPHONE” button to

connect to the telephone line.

2. After hearing a dial tone, dial the desired number. If you misdial, simply press

the “TALK” button. Wait for a couple of seconds, and press the “TALK” button
again for a new dial tone OR press “SPEAKERPHONE” button if
speakerphone is being used. Wait for a couple of seconds, then, press the
“TALK” or “SPEAKERPHONE” button again for a new dial tone.

3. After the conversation has been completed, press the “TALK” OR

“SPEAKERPHONE” button once to disconnect the line, or return the handset
to the base. The IN USE/PAGE LED will turn off.

Receiving a Call Through the Handset
1. IF THE HANDSET IS OUT OF THE CRADLE, press the “TALK” or

“SPEAKERPHONE” button on the handset.

2. Press the “SPEAKER” button on the base for answering the call.
3. IF THE HANDSET IS IN THE CRADLE, lift the handset. DO NOT press the

“TALK” or “SPEAKERPHONE” button, as you will be connected automatically
IF THE UNIT IS SET TO AUTO-TALK MODE.

Page Key
Paging from Base to Handset
1.  Press the PAGE button on base.
2.  All handsets beep and show “PAGING FROM BASE”. The page signal will last

for 2 minutes.

Paging and Intercom with other Handset (For GH5852 only)
1. Press INT button on handset.

2. Press digit key 1 - 4 or * to input the destination. (1 - 4 for destination handset

number, * for all handsets and base).